New Charging station

Couple months back (Ahem.. in February of 2013) on a generic “because i felt so” trip to staples, I came across this filing unit. It was displayed  sideways and then it hit me.. it could be an amazing charging station for my phones and my iPad.

Then it sat in my craft room for a few months (ahem… 8 months) till the stars aligned one Tuesday evening when I decided to watch the FOUNTAINHEAD.

What you need.
photo (2)
One Corner File unit.
(4) socket power surge protector and Power strip
(4) 1 inch eyelets
(2) 1 inch Curtain eyelet
Attractive Paper
Felt pieces

The How

I started with placing the filing unit sideways and decided the position of the strip on the side. This is where the wire and plug would come out and get plugged into the electricity source.


I started by placing the 2 inch curtain eyelet on the side and marking the circle . Using my jewelers pliers, i cut open a circlish hole.

Chargin stn collage 1

After which, I fixed the back and front parts of the eyelet. I had already determined how the three pin plus will pass through the  eyelet as it had to be angled in.

charging stn 2

The next step was to determine where the power strip would go. I could not have it attached to the wall as there would be insufficient space  to actually plug in the chargers. I needed a shelf that hoovered above the floor. I was stumped! This is where the brilliant hubs stepped in and asked me to weave a net like structure that would bridge the gap and act as a shelf for the power strip.Perfect. Using Some Flower making wire, I simply strung the wire back and forth till a bridge like structure was constructed. The power strip sat on this bridge.

Ribbet collage

I then added A piece of felt before placing the power strip. This way when viewed from top the wires were not visible.


Now for the sections where the phones get charged. I followed the same idea as the side eyelet.

Ribbet collage 4

I did not like the look of this, so i decided to add some handmade paper . I like how this looked. In retrospect i should have added the paper before fixing the eyelet, any ways….Last I added bits of felt to all the surfaces, to prevent any scratches .


This is the final charging station, all loaded up.


Love it!

PS : If you are looking to buy the corner unit Look HERE HERE  HERE and i am not getting paid by any of these guys.

Cost Break down

The Corner Filing unit Rs 300 (original Rs 600 Got it at 50% off)
Curtain Eyelet Rs 5
Small Eyelet Rs 12 (Rs 3 X 4)
Jewelry Wire Rs 10
Felt Rs 75 (Rs 25 X 3)
Power strip Previously owned

Total  : Rs 402 .


One thought on “New Charging station”

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s